Australia

Tietto Minerals’ aggressive Abujar exploration returns high-grade gold hits from four areas

Tietto Minerals Ltd (ASX:TIE) has received high-grade gold results from four areas within the 2.2-million-ounce Abujar Gold Project in Côte dIvoire, West Africa, demonstrating the gold mineralised systems continued growth.

Best result from the drilling at Abujar-Gludehi (AG), Abujar‐Gludehi South (AG South), Abujar‐Pischon‐Golikro (APG) and Gludehi‐Gamina Link (GGL) was 21 metres at 2.03 g/t gold from 295 metres, including 7 metres at 4.53 g/t.

Rapid drilling, at over 20% above budget for 61,000 metres to date, has produced more than 6,000 pending assays, including 16 pending holes at AG.

“Continued growth”

Tietto managing director Dr Caigen Wang said: “We are reporting further higher-grade gold results, all anticipated to be within an open-pit, which demonstrate the continued growth of the high-grade core at AG as well as strong intercepts from AG South, APG and GGL.”

“We have now drilled over 61,000 metres, or 20% over budget, and we have extended the assay cut-off for the upco..

Rapid drilling, at over 20% above budget for 61,000 metres to date, has produced more than 6,000 pending assays, including 16 pending holes at AG.

"Continued growth"

“We have now drilled over 61,000 metres, or 20% over budget, and we have extended the assay cut-off for the upcoming resource model to ensure that all assays including 16 additional holes at AG may be incorporated into the resource estimate update, which will be delivered in mid-October.”

“Aggressive exploration”

Once the resource update is delivered, Tietto intends to continue rapidly growing its mineral resource inventory at Abujar throughout 2021.

Wang said: “Following the delivery of the resource update, we intend to continue to rapidly grow our mineral resource inventory at Abujar throughout 2021.

“Our exploration team is planning aggressive exploration programs across three contiguous tenements using our own diamond drill rigs to deliver this rapid growth at an extremely low discovery cost.”

Other strong results were 6 metres at 1.98 g/t from 60 metres including 5 metres at 2./26 g/t at AG, 3 metres at 7.62 g.t from 169 metres including 1-metre at 22.21 g/t at AG South, 8 metres at 1.78 gt/ from 213 metres including 3 metres at 4.08 g/t from APG and 1-metre at 16.30 g/t from 114 metres at GGL.

Ongoing diamond drilling

The company aims to drive resource growth by directing further diamond drilling in the following areas:

AG – Extending high‐grade core (19.3 million tonnes at 2.2 g/t gold for 1.38 million ounces);
AG South – Shallow high‐grade gold mineralisation directly south of AG;
APG – Extension to shallow oxide resources 7 kilometres south of AG; and
GGL (from AG to Gamina) – Directly north of AG; extensive artisanal workings.

Oblique cross section showing latest drill results at AG.

Low-cost exploration

Tietto has five company‐owned diamond Read More – Source

Proactiveinvestors

Australia

Argonaut Resources directors show faith in company by participating in oversubscribed SPP

Argonaut Resources NL (ASX:ARE) directors have demonstrated their faith in the company’s copper-zinc strategy by participating in the recently closed share purchase plan (SPP).

Independent non-executive chairman Patrick Elliot purchased more than 4.465 million shares at 0.55 cents per share in an indirect interest.

He now holds 5,876,159 shares in that interest with another 20,324,574 held in a separate indirect interest.

Independent non-executive chairman Malcolm Richmond acquired more than 5.454 million shares in a direct interest, increasing the number held in this interest to almost 15 million with another 1 million held in an indirect interest.

Overwhelming response to SPP[hhmc]
The company was overwhelmed by the response to its SPP which closed early and more than twice oversubscribed with the target subsequently increased to $2.5 million from $1.2 million.

Subscriptions in excess of $3 million were received and as a result, the SPP was closed with immediate effect.

Money ..

Argonaut Resources NL (ASX:ARE) directors have demonstrated their faith in the company’s copper-zinc strategy by participating in the recently closed share purchase plan (SPP).

Independent non-executive chairman Patrick Elliot purchased more than 4.465 million shares at 0.55 cents per share in an indirect interest.

He now holds 5,876,159 shares in that interest with another 20,324,574 held in a separate indirect interest.

Overwhelming response to SPP

The company was overwhelmed by the response to its SPP which closed early and more than twice oversubscribed with the target subsequently increased to $2.5 million from $1.2 million.

Subscriptions in excess of $3 million were received and as a result, the SPP was closed with immediate effect.

Money raised under this SPP and from the recently completed $2.7 million share placeRead More – Source

Proactiveinvestors

Australia

Strickland Metals shares jump 39% ahead of drilling base metal target near DeGrussa

Strickland Metals Ltd (ASX:STK) shares surged 39% today ahead of its maiden drilling program at the Doolgunna Project, which will include a diamond drilling program that is likely to begin by the end of this month.

As a part of the program, a minimum of four diamond holes will be drilled to a depth of 500 metres to test a VMS target similar to the nearby DeGrussa deposit of Sandfire Resources (ASX:SFR).

Heritage survey[hhmc]
Exploration activity has recommenced on the Doolgunna Project following completion of heritage surveys to allow land access to areas where the company wishes to complete exploration drilling.

The target for drilling is a compelling base metal prospect that exhibits geological characteristics that are interpreted to be similar to Sandfire Resources’ DeGrussa deposit about 30 kilometres to the east of the project.

The prospect has a 3-kilometre-long electromagnetic conductor that lies below an outcropping copper-zinc gossan that has been mapped over a 1.2-kilomet..

As a part of the program, a minimum of four diamond holes will be drilled to a depth of 500 metres to test a VMS target similar to the nearby DeGrussa deposit of Sandfire Resources (ASX:SFR).

Heritage survey

Exploration activity has recommenced on the Doolgunna Project following completion of heritage surveys to allow land access to areas where the company wishes to complete exploration drilling.

The prospect has a 3-kilometre-long electromagnetic conductor that lies below an outcropping copper-zinc gossan that has been mapped over a 1.2-kilometre strike.

Diamond core drilling

The company plans to start the diamond core drilling by the end of this month.

A multi-purpose drill rig has been contracted to enable the minimum planned program wRead More – Source

Proactiveinvestors

Australia

Pan Asia Metals has positive discussions on plans for Thai lithium project

Pan Asia Metals Ltd (ASX:PAM) has had positive discussions with authorities in Phang Nga Province, Thailand, including the provincial government, for its Reung Kiet Lithium Project.

PAM has submitted a presentation covering all aspects of the project including methods of ongoing exploration, conceptual mining and concentrate production, and the potential for downstream value-adding industries in Phang Nga and Thailand.

The presentation and subsequent discussions were aimed at assisting Phang Nga Provincial Government in their considerations for the proposed mining and industrial development areas.

Provincial Government discussions[hhmc]
Pan Asia was recently invited by the chief executive officer of the Phang Nga Provincial Administrative Organisation (PAO), a Phang Nga Provincial Government coordinating body, to represent PAM and the Reung Kiet Lithium Project.

The meeting was also attended by the head of Phang Nga Provincial Industry along with the representatives of the Phang Ng..

Pan Asia Metals Ltd (ASX:PAM) has had positive discussions with authorities in Phang Nga Province, Thailand, including the provincial government, for its Reung Kiet Lithium Project.

The presentation and subsequent discussions were aimed at assisting Phang Nga Provincial Government in their considerations for the proposed mining and industrial development areas.

Provincial Government discussions

Pan Asia was recently invited by the chief executive officer of the Phang Nga Provincial Administrative Organisation (PAO), a Phang Nga Provincial Government coordinating body, to represent PAM and the Reung Kiet Lithium Project.

The meeting was also attended by the head of Phang Nga Provincial Industry along with the representatives of the Phang Nga Provincial Public Works and Town Planning Office.

Phang Nga Provincial Industry head has been appointed by the Phang Nga governor as chairman of the Phang Nga New Town Planning Committee.

During the meeting, the chairman of the committee conveyed its support for the Reung Kiet Lithium Project.

PAO wants to ensure that the requirements of the Reung Kiet project are incorporated into the town planning committee’s zoning plans to ensure that the project can progress once exploration and feasibility results prove positive.

“Can bring opportunities”

PAM managing director Paul Lock said: “We have been working hard in Phang Nga province and we are very happy with the positive reception that the Reung Kiet Lithium Project is receiving from the Phang Nga Provincial Government and surrounding communities.

“Reung Kiet is strategically located and based on peer feasibility work the project is positioned to potentially be one of the lowest-cost suppliers of lithium chemicals in the global peer group.

“This is a project that can bring substantial opportunities and value to Phang Nga and Thailand.”

Pan Asia is planning its second Reung Kiet drilling program with expectations that this will begin in the coming months following the conclusion of the current Khao Soon drilling program.

Potential cost curve leader

Reung Kiet is a hard rock project with lepidolite rich pegmatites chiefly composed of quartz, albite and lepidolite with minor cassiterite and tantalite as well as other accessory minerals including some rare earth.

Lepidolite does not require roasting and has a suite of by-products which are recoverable at the concentrator and processing stages of the flow sheet.

Peer feasibility work has Read More – Source